QUALITY TESTING METHOD   PRODUCT RANGE
Test procedure for obtaining IS 6312 & IS 6312 from Indian Institute of packaging.
235 LTR NARROW MOUTH XL RING BOTH SIDE BARREL
210 LTR NARROW MOUTH XL RING BOTH SIDE BARREL
10 LTR OPEN TOP BUCKET
25 LTR OPEN TOP DRUM
30 LTR OPEN TOP THREADED & RING TYPE DRUM
30 LTR SQUARE OPEN TOP DRUM
35 LTR JERRYCAN TYPE DRUMS
35 LTR OPEN TOP DRUM
40 LTR OPEN TOP DRUM
45 LTR OPEN TOP DRUM
50 LTR NARROW MOUTH
50 LTR ROCKET TYPE DRUM
50 LTR WIDE MOUTH
50 LTR OPEN TOP INNER CAP "C" RING DRUM
55 LTR OPEN TOP DRUM
65 LTR OPEN TOP DRUM
80 LTR OPEN TOP DRUM
100 LTR NARROW MOUTH
100 LTR WIDE MOUTH
MS DRUM RING TYPE FOR EXPORT
MS DRUM WIDE MOUTH FOR DOMESTIC
1. DROP TEST ( Drop Height : 1.20 mtrs.)
a. First barrel was dropped diagonally on closure.
b. Second barrel was dropped flat on top.
c. Third barrel was dropped flat on narrow face.
d. Fourth barrel was dropped diagonally on bottom corner.
e. Fifth barrel was dropped on bottom.
OBSERVATION : Neither rupture nor leakage was observed from any of the tested barrels.
2. CLOSURE LEAKAGE TEST:
Filled barrels were kept upside down on the floor for one hour.
OBSERVATION : No leakage was through the closures.
3. HYDRAULIC PRESSURE TEST:
Hydraulic gauge pressure of 1.1 kg/cm2 was applied inside the barrel for a period of 5 minutes.
OBSERVATION : Neither rupture nor leakage was observed from the barrel.
4. ENVIRONMENTAL STRESS CRACK RESISTANCE TEST:
The section of the barrel were placed in the test liquid at 80 ±2º C for 48 hours.
OBSERVATION : No cracking was observed.
5. STACK LOAD TEST :
A superimposed weight was placed on a flat surface resting on the top of the barrel for a period of 28 days. The weight equivalent to the total weight of filled identical barrels, was stacked on it during transport. ( Stacking height : 3.0 mtrs.) (Test was performed at the Institute)
OBSERVATION : Neither deformation nor leakage was observed.
 
NEXT